XG Series User's Guide Chapter 7 Troubleshooting
To Return to the Initial Shipment Settings (Initializing Switch
Configuration)
598
7.1 To Return to the Initial Shipment Settings
(Initializing Switch Configuration)
In case of incorrect settings or problems, this device status can be returned to its initial shipment settings.
When relocating this device, initialize the settings to the time of shipment before setting.
1. Connect to the device from the terminal PC via the master management blade using the serial
connection.
For the connecting method, refer to "6.3.1 Updating Firmware Using FTP", p. 587.
2. Type user name and password to log in.
User name: admin
Password: Confirm with the system administrator.
3. Type "reset clear", and press the [Return] or [Enter] key.
The configuration of the device is initialized.
Note
Initialization of the setting will erase all the set data. Back up the configuration data or note the contents of settings.
# reset clear <enter>
>
To Next Page
Loading...
