Need help?Do you have a question about the Fuling Inverter DZB200 Series and is the answer not in the manual?
General| Model | DZB200 Series |
|---|---|
| Input Frequency | 50/60Hz ±5% |
| Output Frequency | 0~400Hz |
| Control Mode | V/F control, Sensorless vector control |
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Braking | Built-in braking unit |
| Communication | Modbus RTU |
| Protection Features | Overvoltage, undervoltage, overcurrent, overload, short circuit, overheating, phase loss |
| Humidity | ≤95% (Non-condensing) |
| Altitude | ≤1000m |
| Input Voltage | 3-phase 380V ±15% |
| Overload Capacity | 150% rated current for 60s; 180% rated current for 10s |
| Storage Temperature | -20°C to +65°C |
Details critical safety precautions for installation, wiring, operation, and maintenance.
Provides specific advice on motor insulation, running, maintenance, and usage conditions.
Guidelines for physical mounting, environment, and clearance for the inverter.
Recommendations for wiring main circuits and peripheral equipment.
Guides on navigating the 3-level menu for parameter settings and modifications.
Lists and describes parameters related to basic inverter functions like control mode and frequency settings.
Covers parameters essential for motor control, including rated power, frequency, and speed.
Defines the functions assigned to the inverter's digital and analog input/output terminals.
Detailed descriptions of various protection functions and their settings.
Detailed explanations for communication parameters, including baud rate and data format.
General guidance on identifying and troubleshooting common inverter faults.
To Next Page
