EasyManua.ls Logo

fully Nolan - User Manual

Default Icon
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Nolan handset guide
User guide
For assembly assistance,
please visit fully.com/instructions,
contact us at 888-508-3725
or email support@fully.com
For assistance in Europe,
visit fully.com/contact

Other manuals for fully Nolan

Question and Answer IconNeed help?

Do you have a question about the fully Nolan and is the answer not in the manual?

Overview

This document describes the Nolan handset, a control unit for an adjustable desk, likely manufactured or distributed by Fully. The handset allows users to adjust the desk's height, save preferred height settings, and switch between measurement units.

Function Description

The Nolan handset serves as the primary interface for controlling an adjustable desk. It enables users to raise or lower the desk to their desired working height. A key feature is the ability to save and recall specific height presets, offering convenience for users who frequently switch between sitting and standing positions or share the desk with others. The handset also includes a calibration/reset function to ensure accurate height readings and proper desk operation.

Important Technical Specifications

While specific technical specifications like power requirements or communication protocols are not detailed in this document, the handset features an LED display for showing height readouts and status indicators. The control buttons include numerical presets ('1', '2'), up/down arrows, and a 'fully' button, which likely serves as a confirmation or save button.

Usage Features

Initial Calibration/Reset

To perform an initial calibration or reset:

  1. Press the down arrow until the desk reaches its lowest position.
  2. Release the down arrow.
  3. Press and hold the down arrow for approximately 5 seconds. The desk will move down and then up.
  4. Release the down arrow once this sequence is complete.

Setting Memory Presets

The handset allows users to save two preferred height settings:

  1. Move the desk to the desired height using the up/down arrows.
  2. Press the fully button.
  3. Press either memory position '1' or '2'.
  4. The LED display will show 'S1' or 'S2' to confirm the preset has been saved. The table height will reappear on the display after a few seconds.

Moving to Memory Presets

The method for recalling a saved preset varies slightly by region:

  • Europe: Press and hold either '1' or '2' until the desk reaches the preset height.
  • North America: Users can either press and hold '1' or '2' until the desk reaches the preset height, or they can double-press '1' or '2' to automatically move the desk to the preset height.

Adjusting the Height Readout

If the display is flashing, indicating a need for adjustment:

  1. Press the fully button and release it.
  2. Press and hold the down arrow for more than 5 seconds.
  3. When the display starts flashing, adjust the readout using the up and down arrows.
  4. To save the adjusted readout, press the fully button.

Changing Readout Between Inches and Centimeters

The handset supports switching the height display between inches and centimeters:

  1. Press '1', '2', and the up arrow simultaneously for 3 seconds. The display will show 'SO'.
  2. Press the up arrow until the display shows 'S5'.
  3. Press the fully button to confirm and save the change.

Maintenance Features

This document does not explicitly detail maintenance features. However, the calibration/reset function can be considered a form of operational maintenance, ensuring the desk's height readings remain accurate over time. For assembly assistance and further support, users are directed to online resources and contact information, suggesting that any issues beyond basic operation may require professional guidance or component replacement rather than user-level maintenance.

Support Information

For assembly assistance, users can visit fully.com/instructions or contact Fully at 888-508-3725, or email support@fully.com. For assistance in Europe, users should visit fully.com/contact.

fully Nolan Specifications

General IconGeneral
Brandfully
ModelNolan
CategoryHandsets
LanguageEnglish