WHAT’S INCLUDED:
• 1 Wand middle section with string,
nger loop, and built in swivel for
uid motion
• 1 top wand piece
• 1 bottom wand piece
• 1 USB charging cord
• 2 replacement silicone O rings
(keeps wand pieces secure when
assembled into middle section)
Step 1.
Insert* top piece with the
Wandini logo on it into the
end of the middle section
that also has the logo.
*Twist when inserting and
disassembling the pieces.
Step 2.
Insert* the bottom piece
into the other end.
Step 3.
Turn on by pressing the power button.
To turn off, hold down the power
button for 5 seconds.
HOW TO CHARGE:
Charge before use - insert the
included USB cord with a USB plug
adapter to charge. When the red light
turns off, it’s ready!
Recharge time: 30 minutes.
Stays charged up to 7 hours
depending on light mode used.
TIP: Keep your Wandini box to store your disassembled wand when not in use.
To Next Page
Need help?
General
