fun pro FIVE - Before Use; Set Up the Handlebar; Adjust the Height

14
EN
BEFORE USE
1. Set up the handlebar
Place one foot on the footboard.
Move the lever on the 45° connector
as shown in the drawing. The locking
mechanism opens and the handlebar
area can be raised.
Position the handlebar stem until
it clicks into place. You can see
this on the bolts at the connection
between the footboard and the
45° connector. To check, wiggle the
handlebar to see if it is securely
locked in place.
2. Adjust the height
You can use the height adjustment to adjust the handlebars to the height of the
rider. The handlebars can be continuously adjusted to any height. Ideally, the
arms should be bent at the elbows by approx. 135 °.
Open the quick release on the
handlebar.
Extend the handlebar to the desired
height.