16
EN
You can now turn the handlebars
freely. It is best to stand in front of
the scooter and align the front wheel
as desired. Stand so that the front
wheel is held by your feet. Then align
the handlebar.
As shown above, this is the correct
alignment for the front wheel.
Retighten the clamp screws securely.
This xes the handlebars in the
selected wheel position.
AFTER USE
Insert handlebar ends
To remove the bar ends again, you
must press in the safety pins and can
then pull out the bar ends. It is best
to put them back into the holders at
the end of the handlebars
To Next Page
Loading...