To Next PageTo Next PageWhy is my FUNAI D50Y-100M remote not working?
If your FUNAI Recording Equipment isn't responding to the remote, the first thing to check is the batteries. Make sure they are properly installed and have enough power.
Why can't I see TV programs on my FUNAI Recording Equipment?
If your FUNAI Recording Equipment isn't showing on-the-air TV programs, start by re-checking the ANT IN and ANT OUT connections to ensure they are properly connected. Also, verify that your TV is set to the correct TV channel.
Why is timer recording not working on my FUNAI D50Y-100M?
If you are having trouble with timer recording on your FUNAI Recording Equipment, make sure that the timer recording is set correctly. Also, ensure that the power is off and that the VCR clock is set correctly.
How to adjust tracking control on FUNAI Recording Equipment?
If the playback picture from your FUNAI Recording Equipment is partially noisy, try adjusting the tracking control using the CHANNEL (K/L) buttons to improve the picture quality.
Why does video fade when copying with FUNAI D50Y-100M?
You are likely experiencing copy guard protection. It's not possible to copy a copyrighted video tape using your FUNAI Recording Equipment.
General| Type | DVD Recorder |
|---|---|
| Recording Formats | DVD-R, DVD-RW, DVD+R, DVD+RW |
| Tuner | NTSC |
| Video Recording Format | MPEG-2 |
| Audio Recording Format | Dolby Digital |
| Region Code | 1 |
| Playback Formats | MP3, JPEG |
| Inputs | Composite Video, S-Video |
| Outputs | Composite Video |
| Connectivity | Composite Video, S-Video |
