+ 360
o
5
1. Slide resistance band supports from leg
bases upwards into desired position.
Page 19
2. Fully tighten all grub screws.
6
1. Replace any removed base plates
pegs bolts and fittings.
2. To reduce movement in your frame load
your twirly whirly bars as per original frame
assembly instructions or refer to website at
www.funkymonkeybars.com/pages/videos
INSTALL RESISTANCE BAND SUPPORTS
2x Resistance band
supports from step 3
RE-ASSEMBLE FRAME
Hammer in pegs.
To Next Page
Loading...
