EasyManua.ls Logo

FUNSPARKS Slam Ball - Set Includes; Assembly; Balls; Frame

FUNSPARKS Slam Ball
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manufactured by: Funsparks LLC.
319 Windward Island - Clearwater, FL 33767 USA
1-888-898-3600 info@funsparks.com
®
.com
2 vs 2 Player Game - Ages 10+ - Similar to Volleyball
Easy to Set Up - Very Popular Game
Set Includes:
5 legs - 5 frame tubes (per frame tube there are 5 sliding hooks - 25 hooks total) - 2 tournament balls - 1 larger practice
ball - 1 pump with needle - 1 carry bag Spare Parts: 5 hooks and 1 leg
Assembly: For best results, follow instruction exactly
Balls
1. Deated balls are being used in shipping to reduce your price.
However, we’ve noticed that after pumping, in some cases,
there can be a small bump in the ball as shown in the picture.
If so, it will go away within 24 hours.
2. You will nd the needle for the pump in the top of the handle.
When opening the lid, the needle will come out by itself.
3. Pump up ball as hard as you like. (if the ball is softer it is easier to control)
Frame
1. Make sure that each frame tube has ve sliding hooks attached
2. Connect each leg with two frame tubes until circle is
closed and all parts are connected.
3. Spread the sliding hooks evenly around the frame tubes,
with an average distance between hooks of 4.5” (11.5cm)
(length of colored part of pump)
4. Hook the very end (last hole) of the net to each hook.
5. Ensure the net is evenly attached to the hooks.
6. Then tighten the net one hook after the other clockwise.
7. Tighten the net tension so that the small ball dropped from a height
of 5 feet from the ground should bounce up aprox. 20 inches
from the net. Always tighten mesh evenly so there is consistent
tension throughout.
Distance between hooks
use pump to measure
Made in China. Colors may vary. © Copyright All Rights Reserved by Funsparks LLC. Slam Ball Name and Logo is a TM.

Related product manuals