Use two anchors per post.
Make sure to knock the
anchors into the ground at
a slight angle away from the
posts to aid tensioning, ideally
using a rubber mallet.
To obtain the ideal position
for the sand anchors, unfold
the net completely 1 . The
loops at the ends of the top
cable mark the places for the
posts 2 . Drive the anchors
into the ground at a distance
of approx. 3 m from the post
position 3 to form an approx.
45° angle. Also refer to gure
no. 7 to get an overview of the
correct placement of posts and
anchors.
4
3
To Next Page
Loading...