5
4. Screw one skittle leg in to each corner of
the K - Frame using your hand.
5. Drop the K - Frame in to position inside
base.
Assembly instructions for a 4 part base
Th1. e headboard and foot board will come
with brackets attached, the side panels
will need to be slotted in.
Lift 2. the headboard upright and insert
shown in the image.
o3. Sl t the brackets in to place, repeat on
the other side, using an allen key to
tighten the bolts on each corners.
1.
2.
3.
4.
Repeat this process for both sides of the
foot board.
5.
To Next Page
Loading...