Need help?Do you have a question about the Furukawa ofs Fitel S179 and is the answer not in the manual?
General| Fiber Alignment | Core Alignment |
|---|---|
| Data Output | USB 2.0 |
| Applicable Fibers | SM, MM, DS |
| Splicing Time | 7 seconds |
| Typical Splice Loss | SM: 0.02dB, MM: 0.01dB, DS: 0.04dB |
| Return Loss | ≥ 60 dB |
| Applicable Fiber Diameter | Cladding diameter: 80-150μm, Coating diameter: 100-1000μm |
| Protection Sleeve Length | 40-60 mm |
| Operating Condition | Altitude: 0-5000m, Temperature: -10 to 50°C, Humidity: 0-95%RH, non-condensing |
| Storage Condition | -10 to 50°C, 10 to 90% RH |
| Monitor | 4.3 inch color LCD monitor |
To Next Page
