4. VIDEO SOUNDER OPERATION
4-3
4.2.2 Description of sounder displays
Single frequency display
Color bar
Soft keys
Variable Range Marker (white)
Depth scale
Tx frequency
Depth
Temp.
scale
(orange)
Water
temp.
graph
Water
temp.
display
114
52
Minute marker
Icons
(alarm, battery,
simulation)
Bottom echo
Zero line
Fish
echo
50k
SHIFT
AUTO/
D. BOX
DISPLY
MODE
FREQ
50 /200
50
30
F
40
SOUNDER
SINGLE
Display mode
0
50
100
150
200
Cross-hair
cursor
0'30"
Time
S
I
M
Indications on the single frequency display
Note 1: The water temperature display requires an appropriate water
temperature sensor. It can be turned on or off with TEMPERATURE
GRAPH on the SOUNDER menu.
Note 2: When using the vertically split plotter/sounder display with dual
frequency or zoom display, the depth scale is not displayed. Further, a
last digit on the depth may be overlapped by the line which splits
screens.
Selecting transmission frequency
The single frequency display shows either the 50 kHz picture or 200 kHz picture.
To select transmission frequency, press the FREQ 50/200 soft key to select “50”
or “200”.
To Next Page
Loading...
