7. CUSTOMIZING YOUR UNIT
7-24
7.7.2 GPS receiver setup (Set equipped with GP-310B/320B)
The GPS SETUP menu sets up the GPS Receiver GP-310B/320B. Press the MENU key
followed by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS
soft keys to display this menu.
GPS
SETUP
EDIT
GPS
STATUS
RETURN
GEODETIC DATUM WGS-84
POSITION SMOOTHING 000 second (s)
SPD/CSE SMOOTHING
005 second (s)
LATITUDE OFFSET 0.000’N
LONGITUDE OFFSET
0.000’E
DISABLE SATELLITE - - - - - -
LATITUDE 45
°
35.000’N
LONGITUDE 125
°
00.000’W
ANTENNA HEIGHT
005 m
GPS FIX MODE 2D/3D
COLD START NO
WAAS
SET UP
Appears only when
GPS-320B is connected.
GPS setup menu
Contents of GPS setup menu
Item Description Settings
Geodetic Datum
Geodetic datum is a reference for geodetic
survey measurements consisting of fixed
latitude, longitude and azimuth values
associated with a defined station of
reference. You must have the correct
geodetic datum selected in your plotter so
that it will reference the correct point on
the chart for a given latitude and longitude.
Although WGS-84 is now the world
standard, other categories of charts still
exist. Refer to Appendix for a full list of
geodetic datum.
See Appendix for full list.
(Con’t on next page)
To Next Page
Loading...
