2
1.1.2 Mounting the FURUNO-supplied display unit MU-100C
Desktop mounting
1. Fasten the mounting base to the mounting location with four tapping screws.
FRONT
Mounting Base
2. Do one of the following:
♦ Mounting the display unit and control unit together:
1) Fasten the bracket at the rear of monitor and control units with four binding screws
(M4X10).
1
1
2
2
3
3
4
4
Bracket (rear view)
♦ Mounting the display unit separately from the control unit:
1) Dismount the coupling plate at the rear of the display unit to separate the display unit
from the control unit.
2) Attach the bracket at the rear of the display unit with four binding screws (M4X10).
1
2
3
4
1
2
3
4
Bracket (rear view)
3. Coat threads of upset screws (M6X16, 2 pcs.), which are used to fasten the bracket to
the mounting base, with grease.
To Next Page
Loading...
