25
1.6 Motion Sensor, Clinometer
1.6.1 Motion sensor
The motion sensor can be installed almost anywhere, taking into account the following
mounting considerations.
• Choose a place where vibration is minimal.
• The ambient temperature of the mounting location should not be more than 50°C (122°F).
• Do no install the equipment in the engine room, or fix it to a thin wall or the overhead.
• The usual mounting location is on the deck in the bridge. Refer to the outline drawing for
the motion sensor for mounting dimensions.
Mounting procedure
Orient the FORE mark on the unit toward ship’s bow. Mount the unit level within 5° in all
directions. For adjustment see paragraph 3.3.
FORE
AFT
θ ≤ 5°
To Next Page
Loading...
