EasyManua.ls Logo

Furuno DRS4D-NXT - Page 17

Furuno DRS4D-NXT
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. INITIAL SETUP
11
5. Drag the [Menu Radar] sub menus to find the menu item [Radar Initial Setup].
Menu Radar (Radar Initial Setup)
How to align the antenna heading
You have mounted the antenna unit facing straight ahead in the direction of the
bow. Therefore, a small but conspicuous target dead ahead visually should ap-
pear on the heading line (zero degrees).
In practice, you will probably observe some small bearing error on the display be-
cause of the difficulty in achieving accurate initial positioning of the antenna unit.
The following adjustment will compensate for the error.
Menu item Description
[Antenna Rotation] Select the speed of antenna rotation.
[Antenna Heading
Align]
See the topic of "How to align the antenna heading" on page 2-12.
[Main Bang Sup-
pression]
If main bang appears at the screen center, slide the circle icon so
that the main bang disappears, while watching the radar echo at
the left-hand side of the display.
[Antenna Height] Select the height of the antenna above the waterline.
[Antenna Longitu-
dinal Position]
Enter the antenna positioning bow-stern (Longitudi-
nal) and port-starboard (lateral) position from the ori-
gin.
[Antenna Lateral
Position (-Port)]
Others See Operator’ Manual for TZT9/14/BB.
Title
Origin

Related product manuals