Furuno DS-60 - 6.8 How to Restore Initial Settings

6. MAINTENANCE, TROUBLESHOOTING
6-14
4) To monitor other beams or channels, select [Exit] then press the ENT key to
return to the echo monitor menu.
5) To close the [Setting] menu and return to the echo monitor display, press the
MENU/ESC key.
8. To quit the echo monitor, press the MENU/ESC key to show the [Setting] menu,
select [Exit] then press the ENT key.
6.8 How to Restore Initial Settings
If you feel the equipment is not operating correctly, one cause can be abnormal equip-
ment settings. Try restoring initial settings to restore normal operation. All initial set-
tings are restored, however trip distance and total distance run are not reset.
1. Press the MENU/ESC key to open the menu.
2. Select [User RESET] then press the ENT key.
3. Select [Yes] then press the ENT key.
4. Select [Yes] then press the ENT key to restore initial settings.