3. ADJUSTMENTS
3-2
How to select the language for menu window
The default language for the menu window is English. To change the language to Jap-
anese, set as follows.
1. Press the MENU/ESC key to open the main menu.
2. Select [DISPLAY] then press the ENT key.
3. Select [LANGUAGE] then press the ENT key.
4. Select the appropriate language (English or Japanese) then ENT key.
5. Press the DISP key to close the menu window.
How to Open the [EQUIPMENT] menu for installation
Note: For “MAIN” display unit only, the installation menus are operative. Make sure
that [M] (Main) is shown at the top of display.
1. Press the Power key to turn on the unit.
2. Press the MENU/ESC key to open the main menu. The [SERVICE] menu is
shown in gray and inoperative.
3. Select [EQUIPMENT] then the password input window for the [EQUPMENT]
menu is shown.
[MENU]→[DISP]→[BRILL] key
To Next Page
Loading...
