3. ADJUSTMENTS
3-3
4. Enter the password (ENT key × 6 times) to open the sub menu. The [EQUIP-
MENT] menu has the eight sub menus shown in the figure below.
5. Close the menu by pressing the MENU/ESC key once or click the left button a few
times.
Status bar
The status bar is shown on every screen, and gives you a quick, at-a-glance view of
the DS-85’s current status. See the Operator’s Manual (OME-72880) for this equip-
ment. The two icons for service man are shown below.
• [SIM] icon: Displays when the simulation mode is active (see section 3.3).
• [TEST] icon: Normal operation cannot be performed when the [TEST] icon is dis-
played. To return to normal operation, change the DIP switch settings as follows.
3.1 [EQUIPMENT] sub menu
On the main menu, select
[EQUIPMENT] →[EQUIPMENT]
to open the [EQUIPMENT] sub
menu.
Unit Printed Board DIP switch Setting
Distributor Unit DST board 65P6110 SW3 OFF (all)
Transceiver Unit MAIN board 65P6120 SW2 OFF (all)
[EQUIPMENT] sub menu Option menus
SIM
[SIM] (or [TEST]) icon
Status bar
[EQUIPMENT] sub menu Option menus
To Next Page
Loading...
