Furuno DSC-60 - Chapter 7 Maintenance; 1. Daily Test Procedures and Troubleshooting

4-31
4.7.2 Receiving a polling call
Automatic reply
1. The display changes as follows and the audio alarm sounds when a polling request call is
received and the status of the [5/ACK] key is AUTO ACK and the setting of POLLING CALL
on the Auto ack menu is ON.
Polling auto ack
call in progress!
TIME TO GO : 7S
DSC FREQ : 2177.0 KHZ
TO SHIP : 123456789
ROUTINE
2. After the call is transmitted the following display appears and the audio alarm sounds.
Polling auto ack
call transmitted.
TO SHIP : 123456789
ROUTINE
STOP ALARM
3. Press the [CANCEL] key to silence the alarm. The display changes as below.
JUL-23-1999-23:00:09
POLLING ACKNOWLEDGE
TO SHIP :
123456789
ROUTINE
**
Xmitted message
**
GO TO ALL VIEW
4. Press the [CANCEL] key to return to the DSC standby screen.