1 OPERATION
14
1.8.2 Finding dangerous ship’s data
You can easily find dangerous ships whose CPA and TCPA are lower than the
preset CPA and TCPA values set on the INIT SETTINGS menu.
1. Press the [MENU] key to open the menu.
2. Press the [1] key to choose TARGET DATA.
3. Press the [SFT/ +/-] key to show the DANGEROUS SHIPS display.
[DANGEROUS SHIPS]
NAME CPA( ) TCPA
BOUNTY 0.2 2:00
SEADOG 1.0 2:30
DTLS: [ENT] 1/ 2
Target’s name, and
CPA and TCPA
Target no. selected,
no. of dangerous targets
n
m
Dangerous ships display
4. To find a dangerous target’s details, choose it using the [▲] or [▼] key and
then press the [ENT] key. The data format is the same as that shown on the
previous page.
5. Press the [MENU] key several times to return to the main menu.
Note: The message “LOST” appears at the top of the DANGEROUS SHIPS
display when no AIS signal is received from the selected target.
To Next Page
Loading...
