Furuno FA-150 - Compass Safety Distance; Microphone Cable Precautions

12
A100K11209 v.1.3
VSS-V2 Technical Manual
Figure 1 Microphone Mounting Guidance
4.2.3 Microphone Cable Precautions
When the microphone bracket is fastened on the bulkhead, let the
cables do a one-turn service-loop before entering the microphone
housing. The loop will ensure that the effect of the vibration shock
absorber is not impaired. This is necessary to reduce ship-borne
vibrations reaching the sensitive microphone elements.
4.2.4 Compass safety distance
All units must be mounted with a distance of 70 cm from the vessel’s
standard compass and steering compass.
Title
Size
Date
File
Sheet
Drawn by
Rev.
1/1 1.00
Jesper Sørensen
WHEELHOUSE
MAST/round objects: Mast diameter
0.2m, Distance 0.5m
OBJECTS: Distance min. 10m or 2 times
width of objects whatever the longest.
TYPHOON: Do not place Microphone in front of
ships typhoon. Side distance min. 6m
OBJECTS: Do not place Microphone
close to big and reflective objects.
MICROPHONE Recommended
locations
MICROPHONE Not allowed
locations
DECK
6M
Typhoon
Mast or round objects
0,5M