5. VIDEO PLOTTER OPERATION
5-29
The mark display for light sector differs according to the setting of light beacon.
For details, see the table below.
5.11.5 How to show/hide land mass emphasis
[LAND MASS EPHASIS] sets whether to highlight the outer edge of land masses on
the display.
1. Open the menu.
2. Select [2 MARKS•CHART].
3. Select [0 NEXT].
4. Select [4 EMPHASIZE LAND MASS].
5. Select [OFF] to disable the emphasis. There are three levels of emphasis avail-
able; a higher setting gives a thicker emphasis line around the land mass.
6. Close the menu.
[LIGHT SECTOR] set to [ON]. [LIGHT SECTOR] set to [OFF].
[LIGHT
BEACON]
set to [ON].
Light sector and range lines are
displayed (lines for range are
long).
Only light sector is displayed
(lines for range are short).
[LIGHT
BEACON]
set to [OFF].
Light sector and range lines are
displayed (range lines are long).
Light sector is not displayed.
Light sector
Range line
Light buoy
To Next Page
Loading...
