1. OPERATIONAL OVERVIEW
1-10
1.5 Menu Operations
1.5.1 How to open and close the main menu
The main menu can be accessed from the control unit or from the on-screen box. The
[MAIN MENU] appears in the information box at the right side of the screen.
From the control unit (RCU-014)
Press the MENU key on the control panel.
From the on-screen box
Place the cursor the [MENU] box, then press the left button.
Note: For the sake of abbreviation in procedures, the above methods are written col-
lectively as “Open the menu.” and “Close the menu.”
1.5.2 How to operate the menus
1. Open the menu.
2. Roll the scrollwheel to select a menu item, then left-click. The menu item currently
selected is highlighted and shown in reverse video. You can also select a menu
item by pressing the corresponding numeric key on the control unit.
Echo processing functions
Manages marks and tracks*
Navigation tools (PI lines/EBL/VRM)
Sets target alarm functions**
Sets TT and AIS functions
Manages stored data
Sets data display box items
Processes nav lines and waypoints
Sets up the radar; changes function key settings
*: Own ship and other ships tracks.
**: Alert contact output is set at installation.
Select menu items with arrows ( ) to access the next menu layer.
In this example, the [ECHO] menu is accessed, then the
[CUSTOMIZED ECHO] menu is accessed.
Menu selection is
highlighted and in
reverse video.
To Next Page
Loading...
