Furuno FAR-2218 - Transceiver Unit

2. WIRING
2-54
2.7 Transceiver Unit
The TR-DOWN radar requires the transceiver unit as follows:
• Transceiver Unit RTR-108 for X-band radar (FAR-2328W)
• Transceiver Unit RTR-109 for S-band radar (FAR-2338SW)
2.7.1 How to fabricate the cables
For how to connect the LAN modular plug, see "LAN cable" on page 2-5. For how to
connect the WAGO connector, see "WAGO connector" on page 2-6.
TTYCYSLA-10 (for serial cable)
Clamp the armor with the cable clamp.
J710*
(A)(A)
(B)(B)
J710*
For RW-4864 cable For RW-00136 cable (from upper entrance)
*: For cable for “input” signal of an external radar, connect to J710.
J709
J717
(C)(C)
(D)(D)
(E)(E)
(C)(C)
(D)(D)
(E)(E)
J708
J708
Crimp-on lug
(FV1.25-3(LF) RED for X-band,
FV1.25-4(LF) RED for S-band)
6
6
300
300
35
35
140
140
5
5
Outer sheath Armor Inner sheath
Pass the heat shrink tubing (local supply)
onto the drain wire.
Drain wire
Drain wire
Vinyl tape
(unit: mm)