FOREWORD
xiii
• Two methods of operation are available: the standard supply control unit (RCU-014) and the
optional trackball unit (RCU-015/RCU-016). The ergonomically designed palm rest on the track-
ball unit makes it easy to use.
• Simple operation with “point-and-click” menu functionality.
• All functions can be accessed using only the trackball unit, however, RCU-016 trackball units
do not have a power button.
• TT, AIS, Radar Map, Interswitch and FURUNO’s unique Target Analyzer are supplied as stan-
dard.
• CPA/TCPA alarms.
• Targets activate the user-set alarm zone when entering or exiting the zone.
• The Target Analyzer function helps to find targets in high noise areas (rain/snow), or where
there is interference from surface reflections. (Available for B/W-types only.)
• The FAR-2xx8 series complies with MED 2014/90/EU and also the following directives:
IEC62388, IEC 62288, IMO MSC. 192(79).
Terminology standards used in this manual
This manual uses the following terminology standards:
For the sake of brevity, all procedures in this manual use the terms “Open the menu.” and “Close
the menu”.
Terminology Meaning or usage example
Select • Use the trackball or scrollwheel on the control unit to move the cursor over
the item to be “selected”, then left-click.
• With a menu open: Press the appropriate menu number.
Left-click Press the left mouse button.
Right-click Press the right mouse button.
Control Unit Refers to the RCU-014 Control Unit, unless otherwise specified.
Open the menu. Press the MENU key to show the [MENU].
Close the menu. Press the MENU key to close the [MENU].
To Next Page
Loading...
