Furuno FAR-2238S-NXT-BB - Entering Own Ship Speed

3. ADJUSTMENTS
3-27
8. Select [SELECT CHART TO COPY]. The confirmation message appears.
9. Select [RUN] to copy the chart data.
10. Click the left button.
11. Do one of the following methods to unlock the chart data.
How to unlock the chart data automatically
Note: Save the unlock code to the USB flash memory first. The file extension is
“uc”.
1) Select [LOAD CHART UNLOCK CODE] in the [CHART ADMINISTRATION]
menu to display the list for data in the USB flash memory.
2) Select the file for the unlock code. The confirmation message appears.
3) Select [RUN]. The message "UNLOCK CODE VERIFIED." appears.
4) Click the left button.
How to unlock the chart data manually
1) Select [1. DISPLAY CHART LIST] in the [CHART ADMINISTRATION] menu
to display the chart list.
2) Select the locked chart data (displayed with yellow letters), then click the left
button to display the character entry window.
3) Set the unlock code as described below.
Operate the trackball or the wheel to select a character, then click the left but-
ton to confirm selection. Repeat this step to select all other characters. Select
[ENTER] then click the left button.
The message "UNLOCK CODE VERIFIED." appears.
4) Click the left button.
12. When unlocking the chart data automatically, select [5. REMOVE USB DEVICE].
The message "USB DEVICE CAN BE SAFELY REMOVED." appears. Click the
left button then remove the USB device.
13. Select [CLOSE]. The confirmation message appears.
14. Select [RUN]. The system restarts.