iii
SYSTEM CONFIGURATION
Standard connection
X-band (TR-UP)
Basic configuration is shown with solid line. For footnotes, see "Notes" on page vii.
NOTICE
The radar(s) must be interconnected to the following type approved sensors:
EPFS meeting the requirements of the IMO resolution MSC.112(73).
Gyrocompass (or equivalent devices) meeting the requirements of the IMO resolution A.424(XI).
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing units having approved
LAN ports.
100-230 VAC
1ø, 50-60 Hz
Transformer
440 VAC
1ø, 50-60 Hz
Switching HUB
HUB-100*
7
Control Unit
RCU-014 or RCU-015
Control Unit RCU-016
Monitor Unit*
3
MU-190 or
MU-231 or
MU-270W
Intelligent Hub
HUB-3000*
6
Gyrocompass*
1
(AD-10 format)
Gyrocompass*
1
(IEC61162 format)
AIS Transponder
EPFS*
2
(GPS)
SDME (Speed log)
AMS (IEC61162 format)
Sub Monitor 1 of ECDIS
Sub Monitor 2 of ECDIS
AMS (Contact)*
4
Sub display
Antenna Cable*
5
100-115/220-230 VAC
1ø, 50-60 Hz
(for de-icer)
PROCESSOR
UNIT
RPU-025
ANTENNA UNIT
(for FAR-2218(-BB)/2318, 12 kW)
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
ANTENNA UNIT
(for FAR-2228(-BB)/2328, 25 kW)
XN12CF-RSB128-106
XN20CF-RSB128-106
XN24CF-RSB128-106
100-230 VAC
100-230 VAC
100-230 VAC
VDR
(IEC61162-450 format)
VDR
(Analog RGB)
:
Standard supply
:
Optional or local supply
ECDIS
To Next Page
Loading...
