Furuno FAR-2807 Series - Change of Antenna Speed: RSB-096 and RSB-097

4.13 Change of Antenna Speed: RSB-096 and RSB-097
4-67
4.13 Change of Antenna Speed: RSB-096 and RSB-097
4.13.1 Combination of PWR board and gearbox
The model of antenna DC motor and the jumper setting of the PWR board determines the
antenna speed. The models applicable to this are RSB-096 and RSB-097 for FAR-2xx7.
S-band radars using the antenna AC motor are not applicable to this.
Table 4.13.1 Combination of PWR Board and Gearbox
PWR board setting Gearbox
Input power type
PWR
board
ANT speed
(rpm)
JP161 JP162 Model Motor
03P9339A 24 Open Open
RSB-096
RSB-103
D8G-516 100
VA C
03P9339B 42/36
Note:
Short Short RSB-097 D8G-571
03P9339C 24 Open Open
RSB-096
RSB-103
D8G-516
AC type
220
VA C
03P9339D 42/36
Note:
Short Short RSB-097 D8G-571
03P9338A 24 Open Open
RSB-096
RSB-103
D8G-516
12-24
VDC
03P9338B 42/36
Note:
Short Short RSB-097 D8G-571
03P9338C 24 Open Open
RSB-096
RSB-103
D8G-516
DC type
24
VDC
03P9338D 42/36
Note:
Short Short RSB-097 D8G-571
Note: The setting of menu box can change the antenna revolution to 42 rpm or 36 rpm. See the
next page for details.
PWR (DC) board
PWR (AC) board
- JP161/162
- R168
- TP17 (B.P)
- JP161/162
- R168
- TP17 (B.P)
Fig. 4.13.1 Jumper Arrangement of AC/DC PWR Board