1. RADAR OPERATION
1-86
Alarm name
(visual
indication)
Visual alarm, reason To quit alarm status
TT ALARM (See section 3.15.)
WARNING
AIS
TRANSMITTING
AIS transponder is transmitting.
CABLE ATT ADJ Adjustment (at installation)
according to length of antenna
cable.
DELETE CARD
DATA
Deleting data from memory card.
FORMAT CARD
DATA
Formatting memory card.
PM Performance monitor active
POWER
RESTART
Loading installation settings from
memory card.
RD CARD DATA Reading from memory card.
SART Radar set up to receive SART.
TUNE
INITIALIZE
Initializing tuning.
USER DEFAULT Restoring user defaults.
WR CARD DATA Writing to memory card.
Indication disappears when
procedure is completed.
Note 1: It is not possible to acknowledge the radar critical alarms from external equipment
without displaying the reason/cause for the alarm. Radar critical alarms are TT COLLISION
and AIS COLLISION.
Note 2: This radar does not receive alarm information from external alarm systems.
To Next Page
Loading...
