11
Notes
[Notes]
Go Monitor mode
Select
Unselect
Create
Backup and Restore
Report
Close
1. Put the arrow on Notes in the information area and then click
the Plan button to show the Notes dialog box. Select
Create from the menu and then push the scrollwheel.
2. In the Notes name entry box, spin the scrollwheel to choose
character, and then push the scrollwheel. Repeat to enter name
desired and then click the OK button.
3. In the Edit Record page of the Plan Notes dialog box, check "Enable changes".
4. Roll the trackball to put the arrow on the location desired for Notes and then push the left mouse
button.
5. In the Range box, enter the range from own ship at which to activate the Notes.
6. To show text message on the screen, enter desired message in the text window; spin the
scrollwheel to choose character and push the scrollwheel to confirm.
To show Notes on the chart, turn on Notes in the Mariner page of the Symbol Display dialog box.
There are four ways to show pilot data on the chart:
1. Position marker only
2. Position marker and alphanumeric information
3. Position marker, range ring
4. Position marker, range ring and alphanumeric information
THIS IS A TEST
THIS IS A TEST
1. 2. 3. 4.
i
i i i
Creating Notes
Displaying Notes
Select Notes
Monitor

Plan

X
DISP
DISP
PLAN NOTES
To Next Page
Loading...
