Furuno FCR-2107 series - Color and Size for Tracked Target Symbol

4. Tracked Target (TT) Operation
4-9
4.7.3 Color and size for tracked target symbol
You can select the color and size of the tracked target symbol as follows:
1. Use the trackball to select the Symb DISP box at the right side of the screen then push the left button.
2. Open the Targets page.
Symbol display dialog box, targets page
3. Select the Color box.
4. Spin the scrollwheel to select color desired then push the scrollwheel.
5. Select the Size box.
6. Spin the scrollwheel to select SMALL or STD(Standard) then push the scrollwheel.
7. Click the Close window button (X) to close the menu.