5. AIS Operation
5-7
5.6 Activating Targets
When you convert a sleeping target to an activated target, an activated target’s course and speed are shown with a
vector. You can easily judge target movement by monitoring the vector.
5.6.1 Activating specific target
On the AIS data box, click check mark to activate corresponding target. Alternatively, left-click the symbol of the
target to activate.
Activated target
5.6.2 Activating all targets
1. Use the trackball to select the AIS DISP box at the right side of the screen.
2. Push the right button to open the AIS Target dialog.
Sleep All Targets
Activate All
Auto Disp Msgs NO
Received Msgs
Transmit Msg
3. Spin the scrollwheel to select Activate All then push the scrollwheel.
To Next Page
Loading...
