Furuno FCR-2107 series - Replying to a Safety Message

5. AIS Operation
5-26
5.16.4 Replying to a safety message
To reply to a safety message, proceed as follows:
1. Open the main and shown the Safety Message menu.
2. Check Enable changes.
3. In the Filter field, select Received from the topmost box and the message to
reply to in the box below it.
4. Select Msg Type and Channel as appropriate.
5. Enter your reply in the text window.
6. Place the cursor on the triangle to open the sub menu.
7. Select Send Message then push the scrollwheel.