7. Vector Chart Material
7-51
7.7.6 Loading an RENC-generated permit CD ROM or floppy disk
An RENC can deliver permits in a CD ROM or a floppy disk. When you receive new permits from an RENC, you
have to load them into the chart radar. A permit is a key which is used to decrypt the chart you want to use in the
chart radar. To load permits, do the following:
1. Choose Chart Permits from the Chart menu.
.
2. Click the Load File button.
3. Choose correct drive from the Look in list box.
Permits are available in two formats.
• PERMIT.TXT which contain permits and their editions and
subscription types. This is the preferred format.
• *.PMT, received from an RENC, contain permits, but no edition or
subscription information. Note that the *.PMT format is used by the
system for backup of permits. As a backup it contain also subscription
type and edition.
• Choose suitable permit file and click the Open button to load permits.
The Chart Permits window displays permits which are loaded into the chart
radar.
.
To Next Page
Loading...
