Furuno FCR-2107 series - Setting Display Until Date; Setting Approve Until Date

7. Vector Chart Material
7-70
7.11.3 Setting "display until" date
1. Open the Chart menu.
2. Choose Set Chart viewing dates from the
menu.
3. Set the cursor in the Display Until field,
use the scrollwheel to set desired date, and
confirm by pushing the scrollwheel.
7.11.4 Setting "approve until" date
1. Open the Chart menu.
2. Choose Set Chart viewing dates from the
menu.
3. Set the cursor in the Approve Until field,
use the scrollwheel to set desired date, and
confirm by pushing the scrollwheel.