Furuno FCR-2107 series - Page 328

11. Route Monitoring
11-6
The Alerts page may
show the following
message:
"* = Current selection
differ" indicates which
conditions are currently
set differently as
planned.
Remedy: Open Chart
Alert parameters to set
them as they were at the
time the route was
planned.
The Selection page may
show the following
messages:
"Current selection is
different" This means
the name of user chart
and/or Notes in the
monitoring mode is not
the same as route
planning check.
Remedy: Click the Use
button to choose user
chart and/or Notes in the
monitoring mode.
"This has been
changed after Route
Planning Check" This
means that user chart
and/or Notes was
modified after the latest
route planning check.
Remedy: Check route
planning for the route
with attached user chart
and/or Notes.
Planned Notes: Planned Notes: