1. Operational Overview
1-11
1.7 Configuring Hot Keys F1-F4
Hot keys F1-F4 are provided to call a desired function/menu when pushed.
You can select desired function/menu from a predefined list. To select desired function/menu for each key, do the
following:
1. Spin the scrollwheel until Menu/Info/Chart Menu appears in
the guidance area.
2. Push the left button.
3. Spin the scrollwheel to select Initial Settings then push the
scrollwheel.
4. Place the cursor on the triangle in the menu to show the
Initial Settings menu.
5. Spin the scrollwheel to select Function keys, then push the
scrollwheel. The menu shown right appears.
6. Check Enable changes.
7. Place the cursor on the box for F1, F2, F3 or F4 as
appropriate and spin the scrollwheel to select desired
function or menu.
Enable changes
Item Content
Radar, Chart Radar mode
ALARM ACK Acknowledge alarm generated by this chart radar.
CHART MENU Open chart menu.
CHART DISPLAY Open chart setting dialog box.
SENSORS Open sensor setting dialog box.
MENU Open main menu.
STD/PRIMARY DISPLAY Restore standard/primary display.
SYMBOL DISPLAY Show symbol display dialog box.
TM/CU RESET Return own ship to screen center in true motion and
course-up modes.
TOGGLE SHIP CENTER Toggle own ship position between screen center and
cursor location.
RANGE+ Shrink chart.
RANGE- Enlarge chart.
INITIAL SETTINGS Show initial settings dialog box.
ECDIS mode
ALARM ACK Same as in radar, chart radar mode.
CHART MENU Same as in radar, chart radar mode.
CHART DISPLAY Same as in radar, chart radar mode.
SENSORS Same as in radar, chart radar mode.
MENU Same as in radar, chart radar mode.
STD/PRIMARY DISPLAY Same as in radar, chart radar mode.
SYMBOL DISPLAY Show symbol display dialog box.
RADAR Same as in radar, chart radar mode.
TM RESET Same as in radar, chart radar mode.
SET SHIP OFFCENTER Move own ship position to cursor location.
SET SHIP CENTERED Return own ship position to screen center.
SCROLL Enable scrolling.
SET CHART CENTER Manually set chart center.
RANGE+ Same as in radar, chart radar mode.
RANGE- Same as in radar, chart radar mode.
INITIAL SETTINGS Same as in radar, chart radar mode.
How to activate a menu or function with a hot key
Push the function key corresponding to the menu or function you wish to activate.
To Next Page
Loading...
