1. Operational Overview
1-15
1.10 Ship’s Position
The operator can select navigation sensors to use for navigation and view their current values on the SENSORS
dialog box. For more information about navigation sensors, see Chapter 15 Navigation Sensors.
Note: Availability of sensors to select from the SENSORS dialog box is limited to the position sensors connected to
the system.
1. Place the cursor on the Position field in the information area.
2. Push the right button, and the POSN page automatically appears.
SPD/CRS POSN
DR
LORAN
Off
°
kn
kn
kn
kn
DGPS-1st
NM
3. Select desired navigation sensors. Spin the scrollwheel to select Position sensors (GPS(s)) either Primary or
Secondary then push the scrollwheel.
4. If no Position sensor is selected or no valid position is available, then you can enter position manually, in the
"Deadrec" field.
5. Click the Close window button (X) to close the SENSORS dialog box.
To Next Page
Loading...
