Furuno FCR-2107 series - Choosing Point of Reference for Origin Point of Offset EBL

2. Radar Operation
2-21
2.14.2 Choosing point of reference for origin point of offset EBL
The origin point of the offset EBL can be ground stabilized (geographically fixed), north stabilized (true) or
referenced to own ship’s heading (relative).
1. Use the trackball to select the MENU box at the right side of the screen.
2. Push the left button to display the Main menu.
3. Spin the scrollwheel to select Mark then push the scrollwheel.
4. Use the trackball to place the arrow on the setting of EBL Offset: STAB.
5. Spin the scrollwheel to select GND, N or HDG as appropriate then push the scrollwheel.
6. Click the Close window button (X) to close the Mark menu.