2. Radar Operation
2-44
Markers, measurements and reference point (con't)
Reference point
Category Item
CCRP Antenna position
Bearing cursor Drawn with CCRP at
center
Drawn with antenna
position at center
Course, speed Calculated with
CCRP at center
Calculated with
antenna position at
center
CPA, TCPA Calculated with
CCRP at center
Calculated with
antenna position at
center
BCR, BCT Calculated from bow position
Heading
Speed
Course over ground
Speed over ground
Own ship data
Own L/L
Data from sensor, regardless of reference point
selected
2.31 Cursor Position Data
Cursor position data is shown at the top right side of the radar display.
+
34°40.849'N
135°18.303'E
TTG
48.6°T
01:14 25.62 NM
Time-to-go to
cursor position
Bearing and range
to cursor position
Cursor position in
latitude and longitude
To show Time-to-go data:
1. Open the main menu followed by the Initial Settings menu.
2. Put the cursor on the triangle in the menu to show the Operation menu.
3. Put the cursor on TTG Display.
4. Select Off, Ground Speed, or Water Speed.
To Next Page
Loading...
