2. Radar Operation
2-48
2.35.1 Selecting pre defined chart database display settings
To select desired IMO Chart Display Settings, proceed as follows:
1. Open the Chart Display dialog and move cursor over black triangle on
Chart Display dialog then push the left mouse button.
2. Choose Set IMO Base, Set IMO Primary, Set IMO Standard or Set
IMO All Other from the menu.
2.35.2 Creating user-defined chart database display settings
See section 7.9.6 Storing and recalling chart display setting for visible chart and navigation features.
Note 1: We recommend that you create separate chart databases for "easy viewing of radar in chart radar mode" and
"view chart details in ECDIS mode".
Note 2: Save chart radar mode settings and ECDIS mode settings together when creating a user-defined chart
database.
Note 3: The chart database display settings that can be saved or selected are in the Standard, Other and Other 2
pages of the Chart Display dialog.
Note 4: The items on the Chart page of the Chart Display dialog are common to both the chart radar and ECDIS
modes. However, the items cannot be saved or selected (on the Chart Display menu).
To Next Page
Loading...
