Furuno FCR-2107 - How to Reply to a Safety Message

5. AIS Operation
5-25
5.16.4 How to reply to a safety message
To reply to a safety message, proceed as follows:
1. Open the menu and show the Safety Message dialog box.
2. In the Filter field, select "Received" from the topmost box and the message
to reply to in the Name box below it.
3. Check Enable changes.
4. Select Msg Type and Channel as appropriate.
5. Enter your reply in the text window.
6. Put the cursor on the triangle to open the sub menu.
7. Select Send Message then push the scrollwheel.