Furuno FCR-2107 - Sidebar on User Interface

6. ECDIS Overview
6-4
6.1.3 Sidebar on user interface
You can choose what kind of information to display in the sidebar (right side) of the ECDIS. The options shown
below are available and the content of the sidebar windows change with the devices and sensors connected to the
system. The Route display or Autopilot display is displayed always. You can display one of them together with the
Conning display, Docking display or Chart legend. When two sidebars are active, the width of the information area
is doubled, as shown below.
• Route display
• Autopilot display
• Conning display
• Docking display
• Chart legend
Autopilot
display
Conning
display
(WT)
Sidebar, with autopilot and conning display windows