8. HOW TO CONTROL CHART OBJECTS
8-9
User chart
Labels: Check to show labels on user charts.
Lines: Check to show lines on user charts.
Clearing Lines: Check to show clearing lines (for marking dangerous areas) on user
charts.
Tidals: Check to show symbols and tidals on user charts.
Areas: Check to show areas on the user charts.
Circles: Check to show circles on user charts.
Transparent: Set the degree of transparency for the user chart objects. Color fill for
the areas can be chosen as transparent from 25% to 75% and as [No color fill]. If [No
color fill] is chosen, only the boundaries of the areas are visible.
8.3.5 Targets page
Color: Select color of target (TT and AIS, common) from the list box.
TT Size: Select symbol size for tracked targets, Standard or Small.
AIS ROT TAG Limit: ROT (°/min.), limit to display AIS target with curved speed vec-
tor. (Source of ROT must be ROT gyro on target vessel.)
TT Label: Show or hide the TT label (target no.).
AIS Label: Show or hide the AIS label (ship’s name).
TT Pop-up INFO: Show or hide the TT pop-up, which is shown by right-clicking a TT.
AIS Pop-up INFO: Show or hide the AIS pop-up, which is shown by right-clicking an
AIS target.
Past position
TT Points: Select the number of TT past position points to display.
AIS Points: Select the number of AIS past position points to display.
Style: Select style of presentation of target's past position.
NAME VOYA...
COG: 324.0°T
SOG: 8.1kn
CPA: 0.12NM
TCPA: -19:18
TT(04)
COG: 235.0°T
SOG: 6.1kn
CPA: 0.23NM
TCPA: -10:18
TT pop-up info AIS pop-up info
To Next Page
Loading...
