Furuno FCV-1100L - RANGE SETTING Menu

3. SYSTEM MENU
3-5
3.4 RANGE SETTING Menu
The RANGE SETTING menu presets the range chosen with the [RANGE]
control.
DISP ALM TX/RX E/S SYSTEM
Set preset range scales.
[-/+]: Change set, [EXIT]: Exit
RANGE SETTING
RANGE1 : 30 ft (16 6000)
RANGE2 : 60 ft
RANGE3 : 120 ft
RANGE4 : 250 ft
RANGE5 : 500 ft
RANGE6 : 1000 ft
RANGE7 : 1600 ft
RANGE8 : 3000 ft
M/Z RANGE : 16 ft (16 600)
B/L RANGE : 16 ft
SPLIT RANGE: OFF
RANGE SETTING menu
RANGE1-RANGE8
Presets basic ranges for the [RANGE] switch. Ranges must be set from shallow
to deep, and a range may not be lower than a preceding one. (Setting ranges:
5-2000 m, 16-6000 ft, 2-1200 fa, 4-1600 hiro, 3-1200 P/B)
M/Z RANGE
Sets display range of marker zoom and bottom zoom pictures. (Setting ranges:
5-200 m, 16-600 ft, 2-120 fa, 4-160 hiro, 3-120 P/B)
Note: For the vertical split screen, halve the above values.
B/L RANGE
Sets display range of bottom-lock, discrim-1/2, discrim-1/3 picture. (5-200 m,
16-600 ft, 2-120 fa, 4-160 hiro, 3-120 P/B)
Note: For the vertical split screen, halve the above values.