3-22
3.12 DIP Switch Setting
Interface unit IF-8000
Open the cover of the IF-8000. Set DIP Switch S1 according to system configuration, referring
to the illustration below.
S1
OFF
J6
J7
BUFFER
THROUGH
J1
J3
J2
Processor
Unit
External
Monitor
Interface
Unit
S1:All ON
S1:All OFF
Processor
Unit
External
Monitor
Monitor
Unit
Interface
Unit
S1:All OFF
Processor
Unit
External
Monitor
Interface
Unit
S1:All ON
External
Monitor
Interface
Unit
Control
Unit
Control
Unit
Control
Unit
Figure 3-15 Interface unit, cover removed
EXIF board
Set the DIP switches on the EXIF Board 02P6279 (in the processor unit) according to
equipment connected. No change is necessary when connecting a video sounder which uses a
linear amplifier (FCV-271/382/782, etc.). For video sounder with log amplifier (FCV-1500, etc.)
change the DIP switch settings as below. Early model FURUNO video sounders which have a
log amplifier cannot be connected.
To Next Page
Loading...
