1
OPERATIONAL OVERVIEW
1.1 Control Description
All operations of the FCV-600L are carried out with the controls on the front panel of the
display unit. All controls respond immediately to your command and the unit emits a beep to
signify correct key sequence. (Invalid key input emits several beeps.)
MENU
ESC
SHIFT
-
SHIFT
+
RANGE
-
RANGE
+
GAIN
-
GAIN
+
ALARM
SIG
LEV
AUTO
BRILL
POWER
A
SCOPE
• Opens/closes user
menu. (p. 10)
• Escapes from current
operation.
Note:
This key may be
pressed after the com-
pletion of most oper-
ations to clear the
screen immediately.
Turns A-scope
display on/off.
(p. 10)
Removes weak echoes
from the display. (p. 9)
Adjusts display brilliance
and tone. (p. 3)
Turns power on/off. (p. 3)
Turns automatic operation on/off.
(p. 8)
Selects picture advance speed.
(p. 8)
Enables/disables alarms.
(p. 12)
Adjust gain. (p. 7)
Select basic display range. (p. 7)
Shift basic display range. (p. 7)
Selects display mode. (p. 3)
Cursor Pad
• Shifts variable range marker.
(p. 9)
• Selects menu items.
(p. 10)
ADVANC
MODE
Figure 1-1 Controls
To Next Page
Loading...
