Furuno FEA-2100 - Page 420

404 •
••
• Alarms
Alarm number 4028: DGPS POS. SOURCE CHANGE /1/7
------------------------------
DGPS POSITION SENSOR IN
CHANNEL NUMBER 2 HAS CHANGED
ITS OPERATION MODE FROM
NORMAL TO DIFFERENTIAL OR FROM
DIFFERENTIAL TO NORMAL
SELECT MORE SUITABLE POSITION
SENSOR
Alarm number 4029: DGPS POS. SOURCE CHANGE /1/7
------------------------------
DGPS POSITION SENSOR IN
CHANNEL NUMBER 3 HAS CHANGED
ITS OPERATION MODE FROM
NORMAL TO DIFFERENTIAL OR FROM
DIFFERENTIAL TO NORMAL
SELECT MORE SUITABLE POSITION
SENSOR
Alarm number 4030: DGPS POS. SOURCE CHANGE /1/7
------------------------------
DGPS POSITION SENSOR IN
CHANNEL NUMBER 4 HAS CHANGED
ITS OPERATION MODE FROM
NORMAL TO DIFFERENTIAL OR FROM
DIFFERENTIAL TO NORMAL CHECK
SENSORS AND IF REQUIRED SELECT
MORE SUITABLE POSITION SENSOR
Alarm number 4031: DGPS POS. SOURCE CHANGE /1/7
------------------------------
DGPS POSITION SENSOR IN
CHANNEL NUMBER 5 HAS CHANGED
ITS OPERATION MODE FROM
NORMAL TO DIFFERENTIAL OR FROM
DIFFERENTIAL TO NORMAL
CHECK SENSORS AND IF REQUIRED
SELECT MORE SUITABLE POSITION
SENSOR
Alarm number 4033: ARPA RADAR SPD/CRS ERROR /6
------------------------------
ARPA RADAR SELECTED AS SPD AND
CRS SOURCE IS NOT RECEIVED
CORRECTLY
USE 'SENSORS' SPEED/COURSE TO
SELECT VALID SPD/CRS SENSORS
Alarm number 4201: EXT. NAVIGATION EQ. ERROR /6
------------------------------
NAVIGATION EQUIPMENT
CONNECTED IN ALARM INPUT 1
REPORTS ABOUT INTERNAL FAILURE
Alarm number 4202: EXT. NAVIGATION EQ. ERROR /6
------------------------------
NAVIGATION EQUIPMENT
CONNECTED IN ALARM INPUT 1
REPORTS ABOUT INTERNAL FAILURE
Alarm number 4203: EXT. NAVIGATION EQ. ERROR /6
------------------------------
NAVIGATION EQUIPMENT
CONNECTED IN ALARM INPUT 1
REPORTS ABOUT INTERNAL FAILURE